High gloss finish usually used on the lathe although it can be applied off the lathe
Method of application
Either by holding a moistened pad against work revolving on the lathe or continued rubbing off the lathe
The friction caused by application means that the polish dries immediately
Virtually impossible to calculate due to the nature of application
Can be used on bare wood or over any of the Chestnut Products’ Sanding Sealers. The final finish can be treated with Burnishing Cream for an even higher gloss. Waxes can also be applied over Friction Polish.
Apply a thin coat and keep the cloth moving. For an incredible finish try applying Friction Polish over a burnished coat of Melamine Lacquer then use Burnishing Cream on top.
Methylated Spirits (Should not be needed)
Highly Flammable. Use Safety Cloth when working on the lathe. (see Safety Data Sheet or warnings on can for full details).